May 30, 2020

76 Models in Two Weeks!

That's it! Four units of Beja infantry (two with spears, one with swords, and one with rifles) for my Mahdist army!


And a few trees (I'm up to around a dozen - I've been fitting these into spare moments between units). Just twelve camel riders and a mounted Emir (got a head start on these today, though sadly I don't think I'll have much time tomorrow to make further progress over the weekend) and I'll be ready to march on the infidels!


I'm working on a small, straight forward scenario now, a reconnaissance in force by a British company to investigate reports of massing enemy troops in a nameless village east of Ginnis that could threaten the southern rail line. It will (hopefully) be the first shots in a mini-campaign!

May 25, 2020

Wounded Cameron Highlanders

I wandered off into rules in the last post, specifically about the casualty mechanics in The Sword and the Flame. Hits can kill figures outright or simply wound. A wounded figure cannot move on their own and must be carried by a comrade. The British suffer some pretty hefty morale penalties if they leave their wounded behind. The default mechanic in TSATF is tip lay the model on it's side to indicated the wounded. I'm not a fan of this as I think the bases sticking up in the air really detracts from the appearance of game.


The obvious solution was casualty markers. I'll remove wounded figures in the same manner as the killed, but use the marker to track the difference. Since I also didn't want to paint dozens of deaders, I decided to paint one for each unit and use a small d6 to track the number of wounded. In the event a unit is ever dragging around more than 6 wounded, I'm guessing they will probably be full on retreat. If not, I'll just drop another d6 next to the marker.

Simple, right?

Well, it would have been had I not decided to collect the Devils in Skirts. Perry miniatures doesn't make any wounded Highlanders for the Sudan. Neither does any one else I could find. That meant I would have to make them myself.

Using the Perry wounded in sensible trousers to do the heavy lifting, I set to with saw, file, and green stuff...



The model at the top has lower legs from a plastic Victrix Napoleonic Highlander and I sculpted the upper legs to give me a base for the kilt to drape over. For the one on the bottom, I filed the legs to remove the folds in the trousers and add the top of the stockings with putty. The kilts and sporran were added last. I lack the skill to mimic the tight folds of the rear of the kilt, but I'm happy with the end results.


Ok, back to the Beja!

May 23, 2020

A Tiny Horde

The first two units of Beja are finished for my Mahdist army!


I'm a little disappointed that I only finished two, but it took me a few evenings to build the others (another unit of spears, a unit of rifles, and camels) and I found I was out of Wraithbone primer. Being the apocalypse and all, my FLGS didn't have any so I was forced to turn to Amazon and lost out on two or three days of painting. Happily, the cans arrived this morning and I should have two more units by next weekend.


These really need some decoration on their robes scattered through at least some of the models, but I'll continue to press on for now. They still look pretty cool in a mob!

I still have enough plastic (beyond the units listed above) to build two more units of spearmen and I think I'm going to build them as Kordofani (Nile Arab) warriors, so they'll have little hats and turbans as opposed to the magnificent afros of the Beja and a different skin tone (on which I am still undecided). I'm going to mix in a few more robe colors on those as well to break up the wave of white and cream. I've seen paintings with brown, grey, and even pale blue.

Since I haven't been able to paint as much this week, I've been musing over rules. The project has been designed for The Sword and the Flame, but there are a few things I'm not overly keen on.

The first of these is the close combat system. It seems clunky and the opinion is shared by many around the web (and there are many fans of TSATF that thinks it works just fine). I'm going to withhold judgement on this until I actually get in a few games, but I would prefer to see mechanics that more closely resemble shooting. It's probably an easy fix if I decide to fiddle with it, but the game has stood the test of time so I'll try it as written to begin with.

The second thing that bugs me a little are tracking the wounded. The British need to carry theirs with them when they move and the natives become something akin to landmines in that they can attack an enemy who wanders too close. Again, this feature has opinions split. I LIKE the idea and the character this brings to the battlefield, but I'm not a fan of tipping my models over on their sides and leaving them littering the battlefield.

My initial plan is to make a casualty marker for each British unit - a wounded model with space to set a d6 to track the number of wounded. I think if the number ever goes over 6 wounded (killed models are removed and wounded may be killed as well) the unit is probably in dire trouble and in retreat. The first damn impediment to this plan is that the Perry's didn't make an Highlander casualties meaning I will have to convert them (grumble, grumble). We'll see how my sculpting skills are coming. There are no wounded Egyptians or Sudanese either, but I can probably carve up a command model to make one.

For the natives, I'll make casualty markers as well, but they will only drop half or a third as many (I'll work this out when I get to play some games) landmines as the standard rules. I may just do away with wounded natives all together.

There are tons of rule sets available for the period and I have many of them - Black Powder, The Men Who Would Be King, A Good Dusting, Up the Nile, Donnybrook... all have points to recommend and all are lacking something I want when I read through them. One of the great things of having chosen TSATF to model my armies is that ALL of these sets are playable, more or less, with the collection I'm amassing.

Ah, well - first world problems... More Mahdists soon!

May 18, 2020

From Now On, ALL of My Armies Will Contain Mahdists

Wow! It literally only took three hours to paint twenty-two models. I honestly think it took longer to build these (plastic Perry Miniatures) than it did to paint them!


Now, these guys could have more detail, such as decorative trim on the robes and I'll get around to adding the colored patches to some of the jibba, but I'm happy with how these look for now. I may add shields to some of the models later, but I've read that they didn't often carry them into battle and it was one less thing to paint.

All of the paints are Games Workshop. Steps listed below as 'Contrast' are a single coat of GW Contrast paint. If you've not tried it, the paint is like a base coat and shade in one step. It takes a little experimentation to get the technique down to apply as you can end up with 'patchy' results if you're not careful. The important bit is the order you do these in. Robes, then skin (Rhinox Hide), then hair. Each layer covers the last so you can quickly burn through these.

Primer
Wraithbone

Robes
Contrast: Skeleton Horde* OR Apothecary White*

Skin
Base Coat: Rhinox Hide
Highlight: Doombull Brown

Hair
Contrast: Black Templar*

Turban, Scabbards, and Arm Bands
Base Coat: Khorne Red
Shade: Agrax Earthshade
Layer: Wazdakka Red
Highlight: Wild Rider Red (Turban only)

Spearshafts and Rifle Stocks
Base Coat: Gorthor Brown
Shade: Agrax Earthshade
Highlight: Baneblade Brown

Steel
Base Coat: Iron Warriors
Shade: Agrax Earthshade

Gold
Base Coat: Liberator Gold
Shade: Reikland Fleshade

*GW Contrast paint

If you follow this method, here are a couple of things to note:

1. The robes will seem way too dark when you start out, but after applying the paint to the skin and hair, will brighten right up. I may add a few edge highlights in the future, but I did on my test model and the results weren't really worth the effort.

2. Doombull Brown looks very red when you first apply it, but darkens as it dries and makes a nice highlight.

3. The Baneblade Brown highlight on the spear shaft is a simple stripe down the upper edge. Don't faff about trying to paint the wood grain.

4. The necklaces, arm bands, and other equipment were given a coat of Black Templar when I painted the hair. When these were later picked in out in other colors, they give the 'black lining' effect I use on many of my models.

Whew!

For me 20+ models at a time is too many. Going forward, I'll work in batches of twelve. I'm using the 1, 2, 3 basing method I stole from Dalauppror to give myself the flexibility to remove single casualties, but cut down on having to move hordes of models individually. These look fantastic in the 'Mass Formation' from TSATF. I actually based them on their multiple stands before painting and it was easier to reach everything than I thought it might be. All of my Mahdists with rifles will end up on single bases so I can deploy them in 'Open Order Formation'.

It will take me a few days to put some more models together, but hopefully I can double the number of models above (and finish the bases) by the weekend!

More soon...

May 16, 2020

Cameron Highlanders - Second Platoon, A Company

Done and Dusted!


Second Platoon is led by Lieutenant Ponsonby Worthing and Sergeant McGruffing, turned out for inspection under the critical eye of Captain 'Fighting George' Rippington and Sergeant Major Archer.


I'm excited to get the company finished as it gives me the core for a British force I can actually use for small games and marks the end of painting tartans for a while. I'd really like to paint up the full battalion (four platoons in TSATF) present at Kosha, but I'll save that for the future. I really want to get stuck in with the Mahdists (there are around 100 lined up on the table for the next few weeks) and add some variety to my Imperials.


I'm really enjoying this project. More soon!

May 9, 2020

Cameron Highlanders, 2nd Platoon

Made small progress on the second platoon of my Cameron Highlanders...


Sergeant McGruffing directs the lads 'thataway'. I'm going to do my best to have the rest of the platoon finished by next weekend. Then I'm going to take a short break from the Imperials to paint up a few Mahdists so I can actual get in a game. By a few, I mean something in the realm of 100...

Once I manage to accomplish that (see the optimism?) I'll be switching between the two armies:

IX Sudanese Battalion (20 models)
Two more units of Mahdists (20 models or 12 models depending on if they are foot or mounted)
20th Hussars (12 models)
Two more units of Mahdists (possibly some Nile Arabs to add more variety to the army)
British Camel Corps (12 models mounted plus 10 troopers on foot and two bases of camels 'at ease')
Two more.. you get the idea.

My initial goal is five units of Imperials and something like 200 Mahdists. That's about the limit for a game of The Sword and the Flame (and my 4x6' table). If I actually make it this far, I'll see where the collection goes from there.

More soon...

May 3, 2020

Cameron Highlanders - First Platoon, A Company

I finished the first unit for my project set in the Sudan 1885. Although these are being organized for The Sword and the Flame set, they will work perfectly for Donnybrook as well!


Leader (Hero d12) Henry Hatwaver
Unit of 8 models (Regulars d8) Special Character: Sergeant Charger
Unit of 8 models (Regulars d8) Special Character: Piper McDonald

For those who don't know, the origin of Donnybrook was a one-page set I wrote for playing games with my Darkest Africa collection.


More soon.. starting on the second platoon this week!